5
1.
MAIN FEATURES
1.1 CLASSIFICATION OF THE APPLIANCES
The fundamental elements that make up the HUB system
RADIATOR PACK CF are:
1) External motion-evaporator with electronic control defined
as: "Split water air mono bloc heat pump", powered
via R410A refrigerant with compressor ON - OFF
model Booster HR 7.8 (HUB RADIATOR PACK CF 8.0) or HR
3.0 (HUB RADIATOR PACK CF 3.0).
2) Internal unit composed of a condensing boiler
modulating from 2.9 to 24.9 kW that works to support the pump
of heat and a 48-liter accumulator of technical water in a vessel
closed inside which all the exchangers are positioned
in copper both for the production of ACS and for heat exchange
with the external evaporator.
1.2 CERTIFICATIONS - CE MARKING
The patented HUB RADIATOR PACK CF system complies with
the
Directives 97/23 / EC and 98/37 / EEC.
They also comply with the provisions of the following
Directives: 73/23 / EEC, 89/336 / EEC, as amended by
Directive 93/68 / EEC.
The internal unit of the HUB RADIATOR PACK CF hybrid
system
has been designed to be installed only and exclusively
inside buildings or on a special insulated outdoor niche
thermally and protected from atmospheric agents, if not
this indication is respected, no warranty whatsoever
warranty.
1.3 CONSTRUCTION CHARACTERISTICS
All machines are equipped with a microprocessor for
the control and regulations of operation and safety of the
unit.
The products of the HUB RADIATOR PACK CF series thanks to
the patented direct exchange capacitors can reach
high standards of energy efficiency and SCOP.
Other construction features:
- the cover for the outdoor unit is designed for everyone
the models in epoxy powder coated sheet.
The compressor compartment is completely isolated from the
compartment air cooler exchanger; this allows you to protect
against better electromechanical components;
- the compressor is of the high efficiency rotary type,
working with R 410A refrigerant, mounted on supports
anti-vibration rubber bands, operated by a single-phase electric
motor for all models;
- the air / refrigerant gas exchanger
it is made with copper pipes and blocked aluminium fins
by mechanical expansion of the tubes, with high
heat exchange surface;
- the fan unit consists of a helical fan
operated directly by single-phase asynchronous motor with
internal thermal protection. The fan is equipped with safety
protection grid;
- the A.C.S. quick exchanger it is made of copper
directly immersed in the technical water of the indoor unit
with the FIRST IN - FIRST OUT method, so as to eliminate the
Legionella problem inside the accumulation.
- the refrigeration circuit and the connections between the
individuals components are made of specific copper tube for
refrigeration. The organ of is part of the refrigeration circuit
lamination, the reversing valve cycle the separator of
liquid;
- the electric command and control panel is directly
positioned inside the cover cabinet.
- the microprocessor control system with keyboard is
located on the control plate directly accessible on the
front of the cover cabinet, and can be
remoted using the appropriate command and control panel
remote, available as an accessory, to be installed at
wall or recessed.
- the indoor unit is supplied complete with all the appropriate ones
internal copper exchangers, R410A refrigerant gas connections,
DHW connections, air vent valve, safety valve, filling tap, pressure
gauge, electronic circulator, 9 expansion vessel, temperature
probes, water tap drain.
1.4 CONTENT OF THE PACKAGING
The appliance is shipped on a wooden pallet, with protections in
extruded polystyrene foam and wrapped in a layer of fabric plastic
with air bubbles.
The identification data of the appliance are shown both on the
label on the packaging that on the inside of the technical data
plate of the cover cabinet. Do not remove the technical data plate,
as the references contained therein are necessary for any
maintenance operations. Inside the packaging there is also an
envelope containing this manual and the guarantee certificate,
which must be delivered to the owner of the appliance so that
store them carefully for any future use or consultation.
1.5 STANDARD EQUIPMENT AND ACCESSORIES PROVIDED
A REQUEST
The extensive standard equipment and accessories available on
request allow the optimal use of all the functions of the machines
and the plant to which they are subjected.
1.6 FIELD OF USE
Equipment designed and manufactured for heating of water in
hydronic air conditioning systems and to produce A.C.S., must be
used solely for this purpose, in report to their technical
specifications and performance. The quality and dimensions of
the materials used guarantee a good life span and are suitable for
the operation of the appliances both as a whole and in their
individual components, under reserve of an installation realized to
rule of art and in mechanical, chemical and thermal stress
conditions corresponding to a suitable use.
WARNING! All uses not expressly indicated in this manual they
are considered improper and are not allowed; in particular the use
is not foreseen of appliances in industrial processes and / or
installation in environments with a corrosive or explosive
atmosphere. The manufacturer declines all responsibility for
damages to persons, animals or things resulting from non-
compliance of the instructions in this manual, from modifications
or product tampering, from installation errors, of adjustment,
maintenance and improper use. Failure to comply with what is
indicated in this manual it also entails forfeiture of the warranty
conditions.
1.7 SAFETY STANDARDS
WARNING! Installation and maintenance must be carried out
exclusively by specialized personnel and specially enabled. The
connection to the power supply must be performed according to
the current national plant standards. During installation and
maintenance operations, it is always necessary to operate in the
maximum conditions safety, follow the instructions in this manual
and any
warning labels applied on the product. Respect the
installation and operation limits indicated in in this manual, never
modify the wiring internal electrical and refrigeration pipes, do not
modify or disable the safety and adjustment devices. Before any
inspection, maintenance, or any other means access to internal
parts the appliance, remove the general power supply. In case of
need or clarifications for the installation and the maintenance
contact a Service Center directly Technique authorized by A2B
ACCORRONI E.G.
Summary of Contents for HUB RADIATOR PACK CF 3.0
Page 2: ...2...
