10
4.
INSTALLATION OF INDOOR UNITS
7
8
11 10
5
15
12
14
3
4
6
9
18
16
17
13
19
2
Always install the accumulator inside the building to be heated
away from atmospheric agents and inside a room a
controlled temperature.
Make sure the wall on which the indoor unit will be installed
able to support the entire weight of the system.
Below are the main components that make up the internal unit.
Main components:
1 Support condensing boiler
2 Electronic command and control panel
3 WILO YONOS PICO 25 / 1-8 circulator
4 Digital electronic control unit heat pump
5 Methane gas inlet
6 Digital electronic boiler control unit
7 Boiler smoke outlet
8 60 liter technical inertial storage tank
9 Support bracket
10 3/4 ”system return
11 DHW delivery 1/2 "
12 Cold water inlet 1/2 "
13 3/4 ”system delivery
14 Filler cock
15 Wild air vent valve
16 ON - OFF boiler switch
17 SUMMER / WINTER switch
18 R410A 3/8 ”gas connection
19 Gas connection R410A 5/8 "
4.1 CHOICE OF INSTALLATION SITE OF THE HYBRID
SYSTEM
When determining where to install the internal unit of the system
hybrid HUB RADIATOR PACK CF take the following into
account:
- of the indications contained in paragraph 4.5 (System of
air intake / fume exhaust);
- check that the wall structure is suitable to support the
weight of the indoor unit in operation, avoiding the fixing on
inconspicuous partitions;
- avoid placing the indoor unit above a
appliance that, during use, can affect in
somehow the proper functioning of the same (kitchens
which give rise to the formation of fatty vapours, washing
machines,
shower compartments or bathtubs, etc.).
For correct positioning of the HUB RADIATOR PACK CF
it is necessary to follow the instructions given in Fig. 10 A and
10 B to prepare the connection pipes to the system
heating, sanitary water, gas network and
air intake / flue gas pipes at the time of
hydraulic installation and before installation
of the internal unit HUB RADIATOR PACK CF.
Fig. 9
M
R
C
F
G
Fig. 10 B
1
Fig. 10 A
32
45
32
45
62
87
70
244
185
72
Summary of Contents for HUB RADIATOR PACK CF 3.0
Page 2: ...2...