Accorroni HUB RADIATOR PACK CF 3.0, Technical Information

Page: 3 / 48

3
Technical information
SECTION A - GENERAL INFORMATION
It contains all the information relating to the description of the hybrid air-water heat pumps and their technical characteristics.
SECTION B - TECHNICAL NEWS FOR THE INSTALLER
It gathers all the indications and the prescriptions that the installer technician must observe for the optimal realization of the plant .
SECTION C - USER'S INSTRUCTIONS FOR USE AND MAINTENANCE
It is the section reserved for the user and contains all the information necessary for correct operation and for periodic checks.
Important notes for consultation
1
For the purposes of a correct and safe use of the appliance, the installer, the user and the maintenance technician, for their respective
duties, are required to to observe what is indicated in this manual.
2
The word ATTENTION is followed by information that, due to its importance, must be scrupulously observed and whosec Failure to
comply may result in damage to the appliance and / or impair its safe use.
3 The paragraphs highlighted in bold contain important information, warnings or advice that should be carefully evaluated.
4
The technical data, aesthetic characteristics, components and accessories shown in this manual are not binding.
The A2B Accorroni E.G. Srl reserves the right to make any changes it deems necessary for improvement of your product
Hybrid system
factory made
HUB RADIATOR PACK CF
1. MAIN FEATURES .......................................................... ......................... ............................................................................. 5
1.1
Equipment classification
...
............
....................................................................................................................................... 5
1.2 Certifications and CE marking ............................................................................................................................................. 5
1.3
Construction features
...........
......
.......................................................................................................................................... 5
1.4 Contents of the packaging ..... . .............................................................................................................................................. 5
1.5
Standard equipment and accessories supplied upon request
............................................................................................. 5
1.6 Field of application ............................................................................................................................................................... 5
1.7
Security rules
.............
.........
................................................................................................................................................. 5
2.
EU / UI CONNECTIONS
...................................................................................................................................................... 6
2.1 General provisions .... .. ........................................................................................................................................................ 6
2.2
Electrical connections
.......................................................................................................................................................... 6
2.3 Installation of R410A refrigerant piping .... ...................... ..................................................................................................... 6
3. INSTALLATION OF EXTERNAL UNIT ............................................................................................................................... 7
3.1
Ge Indications
.....
.......
......................................................................................................................................................... 7
3.2 Distances of respect ....... . .................................................................................................................................................... 8
3.3
Roof installation
....................................................................
.......
........................................................................................ 8
3.4 Elimination of air with the vacuum pump .... ........ ................................................................................................................ 8
3.5
Evacuation
...................
..
..................................................................................................................................................... 8
3.6 Pump Down ......................................................................................................................................................................... 8
3.7
Recovery procedure ....
......................................................................................................................................................... 9
4. INSTALLATION OF INDOOR UNITS ..............................................................................................
.
.................................. 10
4.1 Choosing the place of installation ...................................................................................................................................... 10
4.2
Technical data indoor unit patented system HUB RADIATOR PACK CF
.......................................................................... 11
4.3 Example of heating system and DHW production with patented system HUB RADIATOR PACK CF.................. ............ 11
4.4
Assembly procedure
........................
.
................................................................................................................................. 11
4.5 Fume extraction / exhaust system ............... . ..................................................................................................................... 13
4.6
Configuration of the B23 fume intake / exhaust ducts
........................
................
................................................................ 14
4.6.2 Chimney sweep configuration ............................................................................................................................................. 15
4.6.3
Connection to the gas network
............................................................................................................................................ 15
4.6.4 TSP parameters that can be set from the interface and from the Remote Control ................................................... . ......... 15
4.7
Adaptation to the use of other gases and burner adjustment
...................................
....
....................................................... 17
4.7.1 T Transformations from methane to LPG .............................................................................................................................. 17
4.7.2
Transformations from LPG to methane
............................................................................................................................... 17
4.7.3 Checking and adjusting the gas valve .......... .. ...................................................................................................................... 17
- References to laws, regulations or technical rules mentioned in this manual are intended for information only and should be considered
valid at the date of printing thereof, shown on the last page. Entry into force of new provisions or amendments to those in force will not
constitute a reason for any obligation on the part of A2B Accorroni E.G. Srl in against third parties.
- The A2B Accorroni E.G. Srl is responsible for the conformity of its product to the laws, directives and construction standards in force at
time of marketing. Knowledge and observance of the legislative provisions and the rules concerning the design of the systems, installation,
operation and maintenance are the sole responsibility of the designer for their respective duties installer and user.