Abbott i-STAT Alinity Operation Manual Download Page 145

Page: 145 / 296

8. Follow the instructions on screen to complete the Electronic Simulator testing, or press Exit Alerts to

resume normal operation of the instrument.

Note: It is recommended that Electronic Simulator Test be completed immediately following a

software update. Depending on the instrument customization, testing may be disabled until an

Electronic Simulator Test with passing result is completed.

Troubleshooting:

If there is any question as to whether or not the software update completed, check the software status

page. From the Home screen, navigate to:More Options > Instrument Options > Software Installation >

Software Status

•

If the Firmware name displayed on the Software Status page matches that which was recorded during

the software update procedure, this indicates that the software update was completed.

Symptom

Action to take

Check for Update button is not enabled

Verify the following as described in the

prerequisites, and repeat the software update

procedure:

•

The instrument is running software version

OSi05 or later

•

Network Services for software update enabled

on instrument

•

The battery charge level is no less than 51%

107

i-STAT Alinity — System Operations Manual

Art: 754496-01 Rev. E

Rev. Date: 02-Nov-2022

Summary of Contents for i-STAT Alinity









































































































































































































































































































Search results

Summary of Contents for i-STAT Alinity

Reviews:

Abbott i-STAT Alinity, Operation Manual, Page: 145 / 296

Search results

Summary of Contents for i-STAT Alinity

Reviews: