ABB ACS380 Series, Hardware Manual

Page: 26 / 186

26 Introduction to the manual
Macro Pre-defined default values of parameters in drive control program. Each
macro is intended for a specific application.
NETA-21 Optional remote monitoring tool
Network control With fieldbus protocols based on the Common Industrial Protocol
(CIP
TM
), such as DeviceNet and Ethernet/IP, denotes the control of the
drive using the Net Ctrl and Net Ref objects of the ODVA AC/DC Drive
Profile. For more information, refer to
www.odva.org , and the following
manuals:
• FDNA-01 DeviceNet adapter module user’s manual (3AFE68573360
[English])
• FENA-01/-11/-21 Ethernet adapter module user’s manual
(3AUA0000093568 [English])
Parameter User-adjustable operation instruction to the drive, or signal measured or
calculated by the drive
PLC Programmable logic controller
PROFIBUS,
PROFIBUS DP,
PROFINET IO Registered trademarks of PI - PROFIBUS & PROFINET International
R0, R1, … Frame (size)
RCD Residual current device
Rectifier Converts alternating current and voltage to direct current and voltage.
RFI Radio-frequency interference
SIL Safety integrity level. Refer to Safe torque off function on page 139 .
STO Safe torque off. Refer to Safe torque off function on page 139 .
Term/abbreviation Explanation