Introduction to the manual 25
Terms and abbreviations
Term/abbreviation
Explanation
ACS-AP-x
Assistant control panel. An advanced operator keypad for
communication with the drive.
Brake chopper
Conducts the surplus energy from the intermediate circuit of the drive to
the brake resistor when necessary. The chopper operates when the DC
link voltage exceeds a certain maximum limit. The voltage rise is
typically caused by deceleration (braking) of a high inertia motor.
Brake resistor
Dissipates the drive surplus braking energy conducted by the brake
chopper to heat. Essential part of the brake circuit. Refer to
.
Capacitor bank
Refer to
Control board
Circuit board in which the control program runs.
BAPO-01
Optional side-mounted auxiliary power extension module
BCAN-11
Optional CANopen interface
BCBL-01
Optional USB to RJ45 cable
BREL-01
Optional side-mounted relay output extension module
BTAC-02
Optional side-mounted pulse encoder interface module
CCA-01
Optional cold configuration adapter
DC link
DC circuit between rectifier and inverter
DC link capacitors
Energy storage which stabilizes the intermediate circuit DC voltage
Drive
Frequency converter for controlling AC motors
EFB
Embedded fieldbus
EMC
Electromagnetic compatibility
FBA
Fieldbus adapter
FCAN-01
Optional CANopen adapter module
FCNA-01
Optional ControlNet adapter module
FDNA-01
Optional DeviceNet adapter module
FECA-01
Optional EtherCAT adapter module
FENA-11/-21
Optional Ethernet adapter module for EtherNet/IP, Modbus TCP and
PROFINET IO protocols
FEPL-02
Optional Ethernet POWERLINK adapter module
FPBA-01
Optional PROFIBUS DP adapter module
Frame (size)
Refers to drive physical size, for example, R0 and R1. The type
designation label attached to the drive shows the frame of the drive,
refer to
on page
.
I/O
Input/Output
IGBT
Insulated gate bipolar transistor
Intermediate circuit
Refer to
Inverter
Converts direct current and voltage to alternating current and voltage.
LRFI
Series of optional EMC filters
Summary of Contents for ACS380 Series
