manualshive.com logo in svg

ABB ACQ550-U1-011A-6, User Manual

The ABB ACQ550-U1-011A-6 User Manual is a comprehensive guide that provides detailed instructions and information on operating and optimizing the product. This manual can be easily downloaded for free from manualshive.com, allowing users to access all the necessary information required to harness the full potential of this exceptional product.

Share
Download
background image

ACQ550-U1 User’s Manual

313

Index

T

temperature derating . . . . . . . . . . . . . . . . . . . . .   270
template, mounting  . . . . . . . . . . . . . . . . . . . . . . .   16
terminal lugs  . . . . . . . . . . . . . . . . . . . . . . . . . . .   278
terminals

control, description  . . . . . . . . . . . . . . . . . . . .   24
control, specifications . . . . . . . . . . . . . . . . .   290
location diagram, R1…R4 . . . . . . . . . . . . . . .   21
location diagram, R5/R6 . . . . . . . . . . . . . . . .   22

termination. . . . . . . . . . . . . . . . . . . . . . . . . . . . .   179
test date, parameter  . . . . . . . . . . . . . . . . . . . . .   131
thermal fail, fault code . . . . . . . . . . . . . . . . . . . .   254
three-wire sensor/transmitter, connection example 65
time & date  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   53
timed functions

parameter group . . . . . . . . . . . . . . . . . . . . .   138
autochange, parameter . . . . . . . . . . . . . . . .   175
booster, parameter . . . . . . . . . . . . . . . . . . .   140
enable, parameter . . . . . . . . . . . . . . . . . . . .   139
source, parameter . . . . . . . . . . . . . . . . . . . .   140
speed control. . . . . . . . . . . . . . . . . . . . . . . . .   99
start time, parameter . . . . . . . . . . . . . . . . . .   139
stop time, parameter . . . . . . . . . . . . . . . . . .   139

timed mode, parameter . . . . . . . . . . . . . . . . . . . .   99
TN-S system . . . . . . . . . . . . . . . . . . . . . . . . . . .   275
tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   14
top cover, see hood
torque

at fault, history parameter . . . . . . . . . . . . . . .   91
boost current, parameter. . . . . . . . . . . . . . .   114
data parameter . . . . . . . . . . . . . . . . . . . . . . .   85
max. limit select, parameter  . . . . . . . . . . . .   111
max. limit, parameter. . . . . . . . . . . . . . . . . .   112
min. limit select, parameter . . . . . . . . . . . . .   111
min. limit, parameters . . . . . . . . . . . . . . . . .   111

torque control

vector:torque mode . . . . . . . . . . . . . . . . . . . .   83

training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   315
trim

mode (PID), parameter . . . . . . . . . . . . . . . .   154
scale (PID), parameter  . . . . . . . . . . . . . . . .   154

two-wire sensor/transmitter, connection example  65
type code

see type designation

type designation  . . . . . . . . . . . . . . . . . . . . . .   12, 13

U

U/f ratio, parameter . . . . . . . . . . . . . . . . . . . . . .   121
UL/CSA markings  . . . . . . . . . . . . . . . . . . . . . . .   300
underload curve

see user load curve

undervoltage

automatic reset, parameter . . . . . . . . . . . . .   128
control enable, parameter . . . . . . . . . . . . . .   110

ungrounded network

see IT system

units (PID), parameter . . . . . . . . . . . . . . . . . . . .   147
unknown drive type, fault code  . . . . . . . . . . . . .   255
unpacking drive . . . . . . . . . . . . . . . . . . . . . . . . . .   12
unsymmetrically grounded networks

see corner grounded TN system

user load curve

parameter group. . . . . . . . . . . . . . . . . . . . . . 142
fault code . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
frequency, parameters . . . . . . . . . . . . . 142, 143
function, parameter  . . . . . . . . . . . . . . . . . . . 142
mode, parameter  . . . . . . . . . . . . . . . . . . . . . 142
time, parameter  . . . . . . . . . . . . . . . . . . . . . . 142
torque, parameters . . . . . . . . . . . . . . . . 142, 143

user parameter set . . . . . . . . . . . . . . . . . . . . . . . . 66

change control, parameter . . . . . . . . . . . . . . 107
download  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

V

vector:

speed mode . . . . . . . . . . . . . . . . . . . . . . . . . . 83

version

firmware, parameter . . . . . . . . . . . . . . . . . . . 131
loading package, parameter . . . . . . . . . . . . . 131
parameter table, parameter  . . . . . . . . . . . . . 131

vibration, stress testing . . . . . . . . . . . . . . . . . . . . 297
voltage

at fault, history parameter. . . . . . . . . . . . . . . . 91
rating code . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

voltage/frequency ratio, parameter . . . . . . . . . . . 121

W

wake-up

delay (PID), parameter . . . . . . . . . . . . . . . . . 151
deviation (PID), parameter . . . . . . . . . . . . . . 151

warning

automatic start up . . . . . . . . . . . . . . . . . . . . . . . 6
dangerous voltages  . . . . . . . . . . . . . . . . . . . . . 5
disconnecting device (disconnecting means) . . 6
ELV (Extra Low Voltage)  . . . . . . . . . . . . . . . . 25
EM1, EM3, F1 and F2 screws  . . . . . . . . . . . . . 6
filter on corner grounded TN system  . . . . . . . . 6
filter on IT system . . . . . . . . . . . . . . . . . . . . . . . 6
high temperatures  . . . . . . . . . . . . . . . . . . . . . . 6
listing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
not field repairable . . . . . . . . . . . . . . . . . . . . . . 6
parallel control connections  . . . . . . . . . . . . . . . 5
qualified installer. . . . . . . . . . . . . . . . . . . . . . . . 5

weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
wiring

control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
fault, parameter  . . . . . . . . . . . . . . . . . . . . . . 127
installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
installation steps, IP21/cables  . . . . . . . . . . . . 27
installation steps, IP21/conduit. . . . . . . . . . . . 28
installation steps, IP54/cables  . . . . . . . . . . . . 29
installation steps, IP54/conduit. . . . . . . . . . . . 30
overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
requirements, general  . . . . . . . . . . . . . . . . . . 19

XYZ

zero speed

delay, parameter  . . . . . . . . . . . . . . . . . . . . . 115
load, fault parameter  . . . . . . . . . . . . . . . . . . 125

Summary of Contents for ACQ550-U1-011A-6



























































































































































































































































































































Reviews:

No comments

Related manuals for ACQ550-U1-011A-6

Samsung TS-H542A Manual preview
TS-H542A
Brand: Samsung Pages: 24
Samsung Super-writemaster SH-S203N User Manual preview
Super-writemaster SH-S203N
Brand: Samsung Pages: 2
Samsung SH-W162L Manual preview
SH-W162L
Brand: Samsung Pages: 32
Samsung SH-M522C - CD-RW / DVD-ROM Combo Drive User Manual preview
SH-M522C - CD-RW / DVD-ROM Combo Drive
Brand: Samsung Pages: 27
Samsung SE-S084B - DVD RW / DVD-RAM Drive User Manual preview
SE-S084B - DVD RW / DVD-RAM Drive
Brand: Samsung Pages: 2
Samsung SD-816B Manual Del Usuario preview
SD-816B
Brand: Samsung Pages: 19
Samsung SD-616Q User Manual preview
SD-616Q
Brand: Samsung Pages: 2
Fagor QC-PDS Original Instructions Manual preview
QC-PDS
Brand: Fagor Pages: 36
YASKAWA LA500 Technical Manual preview
LA500
Brand: YASKAWA Pages: 376
Nidec AD07-E-1-1-023-1-0002 Installation & Operating Instructions Manual preview
AD07-E-1-1-023-1-0002
Brand: Nidec Pages: 56
Rotel RDD 980 Owner'S Manual preview
RDD 980
Brand: Rotel Pages: 7
ANSMANN FM6.0 Original Operating Instructions preview
FM6.0
Brand: ANSMANN Pages: 51
Sony CRX1600L User Manual preview
CRX1600L
Brand: Sony Pages: 40
Siemens PXC00-PE96.A Installation Instructions preview
PXC00-PE96.A
Brand: Siemens Pages: 2
Siemens MICROMASTER 440 GX Maintenance Instructions preview
MICROMASTER 440 GX
Brand: Siemens Pages: 2
Siemens MICRO MASTER Junior Operating Instructions Manual preview
MICRO MASTER Junior
Brand: Siemens Pages: 12
Siemens SIDOOR ATD400K Operating Instructions Manual preview
SIDOOR ATD400K
Brand: Siemens Pages: 44
Siemens 6SL3860 Reference Manual preview
6SL3860
Brand: Siemens Pages: 40

Brands by name

Popular brands

Load more brands