Programming
ABB Control - AC 31
Page 5-15
1SBC 260400 R1001-b
06.99
4.1.11. Communication mode of the COM1 serial interface
The serial port of the central unit may be used in different modes:
Programming mode to program and test the central unit
ASCII mode for communicating between the central unit and another ASCII device
MODBUS® for communicating between the central unit and another MODBUS
®
device.
To use one of these communication modes you must:
Configure the serial interface by selecting one of the proposed parameters in the
configuration window
Know the position of the RUN/STOP button
Use the right cable:
- For programming : 07 SK 50 or 07 SK 52
- For ASCII / MODBUS
®
: 07 SK 51 or 07 SK 53
Parameter selection
RUN/STOP position
Cable
Communication
mode
Standard
STOP
x
programming
RUN
programming
programming
ASCII/MODBUS
®
ASCII
Programming
x
x
programming
ASCII
RUN
x
ASCII
STOP
x
programming
MODBUS
®
x
ASCII/MODBUS
®
MODBUS
®
programming
programming
x: choice with no effect
Summary of Contents for AC 31
