A&D GF-10202M Instruction Manual Download

Page: 137 / 148

137

25-3

Other Display

When this indicator ( ) blinks, automatic self calibration is required. The

indicator blinks when the balance detects changes in ambient temperature.

If the balance is not used for several minutes with this indicator blinking,

the balance performs automatic self calibration. The blinking period

depends on the operating environment.

Advise

The balance can be used while this indicator is blinking. We recommend that you
perform automatic self calibration for precision weighing.

25-4

Asking For Repair

If the balance needs service or repair, contact your local A&D dealer.
The balance is a precision instrument. Use much care when handling the balance and observe the following
when transporting the balance.

□

Use the original packing material for transportation.

□

Remove the weighing pan, pan support, breeze break ring and dust plate from the main unit.

Summary of Contents for GF-10202M



















































































































































Search results

Summary of Contents for GF-10202M

Reviews:

Related manuals for GF-10202M

Brands by name

Popular brands

A&D GF-10202M, Instruction Manual

Search results

Summary of Contents for GF-10202M

Reviews:

Related manuals for GF-10202M

Brands by name

Popular brands