A&D GF-10202M, Instruction Manual

Page: 115 / 148

115
19. After output, is displayed.
20. Press and hold the SAMPLE key (for 2 seconds) to store minimum weighing value. Display
returns to .
* In this time, when
MW-CP
is set to
0,
the balance automatically set it to
1
(except near zero) and
enables comparing function of the minimum weighing value.
21. Press the CAL key twice to proceed to weighing mode. Alarm function of minimum weighing
value is started.
17-2-2 Setting from the weighing mode
1. Press the MODE key in weighing mode.
After confirming display,
press the PRINT key.
2.
KEY in
is displayed.
As following procedure, continue to Step 8
of
【
Inputting the setting value directly
】
or
Step 8 of
【
Entering from repeatability of
external weight
】
in “17-2-1 Setting from
function setting” to set minimum weighing
value.
17-2-3 Outputting the setting value at once
The minimum weighing value set currently and results for repeatability can be output at once.
1. Press and hold the PRINT key (for 2 seconds)
while
KEY in
or
Ext MA55
is displayed.
2. Press the REZERO key to toggle between “
No
” or
“
Go
”
on
OuT
display.
Select
“
Go
”
and press the PRINT key.
Setting values are outputted at once.
MW 23.20
0
_
1 %
MW 23.20
0
_
1
%
MW 23.20
KEY
MW
KEY in
EXT MA55
Press and hold (for 2 seconds)
Batch output
Out
Go
Out
No
End
Setting process is displayed
at unit display above.
KEY
Input setting value
EXT
Input from repeatability for the external weight
ECL
Input by ELC (press and hold the MODE key)
Refer to “8-2 Self-Check-Function / Automatic Setting Of
Minimum Weight Value”.
0.00
MW 23.20
KEY
KEY in