79
Enabling data memory function
1. Press and hold the SAMPLE key (for 2 seconds) until
1
ba5fnc
of the function table is displayed.
2. Press the SAMPLE key several times to display
dout
.
3. Press the PRINT key.
4. Press the SAMPLE key several times to display
data
.
5. Press the RE-ZERO key to display .
6. Press the PRINT key to store the setting.
7. Press the CAL key to return to the weighing mode.
Display and symbol
Caution
□
When weighing data is being stored in memory, the data is output simultaneously using RS-232C interface or
USB.
□
"
fUl
" indicates that memory is full or the memory capacity has been reached. More data cannot
be stored unless the memory data is deleted.
□
Automatic self calibration can not be used while the interval memory mode is active.
□
Statistic calculation function can not be used when the data memory function is active.
Weighing display in
progress
Display of measured weighing
value
Number of stored data
Data number of the
displayed weighing
value
Full memory
When the volume of measured
values stored reaches its
maximum,
fUl
dat
blink in turn.
Press and hold
Press several times
dATA WT/
CA
L
2
5 if
bA5Fnc
dout
dAtA
0
OFF
(for 2 seconds)
Summary of Contents for GF-10202M
Page 141: ...141 29 External Dimention Unit mm ...
Page 145: ...145 MEMO ...
Page 146: ...146 MEMO ...
Page 147: ......
