manualshive.com logo in svg

A&D GF-10202M, Instruction Manual

Share
Download
A&D GF-10202M Instruction Manual Download Page 28

28 

 

6-3

 

Percent Mode (

％

) 

 

The  percent  mode  displays  the  weighting  value  in  percentage  compared  to  a  100% 
reference mass and is used for target weighing or checking the sample variance. 

Selecting The Percent Mode 

1.  Press the    MODE    key to select the unit    %    (Percent mode).   

Storing The 100% Reference Mass 

2. Press the    SAMPLE    key to enter the 100% reference 

mass storing mode. 

 

Even in the storing mode, pressing the    MODE    key will 

switch to the next mode. 

3.  Place a container on the weighing pan, if necessary. Press the    RE-ZERO   

key to cancel the weight (tare). The balance displays   

100 0

 % 

.   

4.  Place the sample to be set as the 100% reference mass on the pan or in 

the container.   

5.  Press the    PRINT    key to store the reference mass.   

The balance displays   

100.00

 %. (The decimal point 

position depends on the reference value. The reference 
mass stored, even if the AC adapter is removed, is 
maintained in non-volatile memory.) 

Note 

□ 

If  the  balance  judges  that  the  mass  of  the  sample  is  too  light  to  be 

used as a reference, it displays   

 lo

   

  .

  

□ 

The displayed percentage is based on the 100% reference mass.

  

Model 

100% mass 

Decimal point position 

Minimum display 0.01g    1.00g ~ 9.99g 

1% 

10.00g ~ 99.99g 

0.1% 

100.00g ~ 

0.01% 

Minimum display 0.1g   

10.0g ~ 99.9g 

1% 

100.0g ~ 999.9g 

0.1% 

1000.0g ~ 

0.01% 

□ 

Registered values are stored even when the power is turned off. 

6.  Remove the sample 

 

Reading the percentage 

7.  Please a sample to be compared to the reference mass on the pan. 

 

The displayed percentage is based on the 100% reference mass. 

place

Display % of weighing object

Weighing pan

Container

Sample

(100%)

Summary of Contents for GF-10202M





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands