A&D GF-10202M, Instruction Manual

Page: 7 / 148

7
1-2 About The Models
There are many models in the GX-M series and GF-M series with differences in the models being the
minimum display and weighing capacity. In this manual, they are listed collectively by the minimum
display as shown in the table below.
Model Minimum
display
Applicable model
Internal mass type General type
0.01g model 0.01g
GX-8202M / GX-8202MD
GX-10202M GF-8202M / GF-8202MD
GF-10202M
0.1g model 0.1g
GX-12001M / GX-22001M
GX-32001M / GX-32001MD GF-12001M / GF-22001M
GF-32001M / GF-32001MD
□
For the GX-M series, a weight for sensitivity adjustment is built in. It is possible to use functions
such as calibration and auto calibration using the internal mass.
□
For the GF-M series, sensitivity adjustment weights are not built-in. When calibrating, it is
necessary to prepare an external weight.
1-3 Compliance
Compliance with FCC Rules
Please note that this equipment generates, uses and can radiate radio frequency energy. This
equipment has been tested and has been found to comply with the limits of a Class A computing
device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide
reasonable protection against interference when equipment is operated in a commercial
environment. If this unit is operated in a residential area, it may cause some interference and under
these circumstances the user would be required to take, at his own expense, whatever measures
are necessary to eliminate the interference.
(FCC = Federal Communications Commission in the U.S.A.)