A&D GF-10202M Instruction Manual Download Page 128

Page: 128 / 148

128

21-4 Registering Password (Changing)

The password can be changed at "Password ( )" of the Function Table.

1. Press and hold the SAMPLE key (for 2 seconds) in the

weighing mode.

ba5fnc

is displayed.

2. Press the SAMPLE key several times until is displayed.

3. Press the PRINT key to display

Lock .

4. Press the SAMPLE key to display

PA55 No .

5. Press the PRINT key to display

ADMIN

6. Press the SAMPLE key to change the login level

ADMIN

U5ER 01

  If the password is already registered at the login level, the
  stability mark                      is lit. (changeable)

7. Press the PRINT key to change the password.

Refer to "21-5. Changing Password".

Note

□

Turn off the display by pressing the ON:OFF key to log out.

□

If set to

Lock 2,

the

ADM1N

password is required when logging in as

an administrator.

Password rigistration of

U5ER 01

is unnecessary.

bA5Fnc

LOcK

ALL

0.00

PA55NO.

Press several times

PA55 wd

Press several time

ADM

U5ER

Refer to "21-5. Changing Password"

Press and hold

(for 2 seconds)

Summary of Contents for GF-10202M



















































































































































Search results

Summary of Contents for GF-10202M

Reviews:

Brands by name

Popular brands

A&D GF-10202M, Instruction Manual

Search results

Summary of Contents for GF-10202M

Reviews:

Brands by name

Popular brands