![A&D GF-10202M Instruction Manual Download Page 13](http://html.mh-extra.com/html/aandd/gf-10202m/gf-10202m_instruction-manual_446426013.webp)
13
Do not allow the balance to be immersed in water. Even though the balance complies with
IP code, the balance will not withstand being completely immersed in water.
The weighing pan, pan support and draft gate can be removed to clean the balance. Clean
by splashing with water.
3-4 Power Supply
Do not remove the AC adapter while the internal mass is in motion, for example, right
after the AC adapter is connected, or during calibration using the internal mass.
If the AC adapter is removed under the conditions described above, the internal mass
will be left unsecured, that may cause mechanical damage when the balance is
moved.
Before removing the AC adapter, press the
ON:OFF
key and confirm that zero is
displayed.
When the AC adapter is connected, the balance is in the standby mode if the standby
indicator is on. This is a normal state and does not harm the balance. For accurate
weighing, keep the AC adapter connected to the balance and AC power unless the
balance is not to be used for a long period of time.
Summary of Contents for GF-10202M
Page 141: ...141 29 External Dimention Unit mm ...
Page 145: ...145 MEMO ...
Page 146: ...146 MEMO ...
Page 147: ......