93
Recalling the tare value (Quick selection mode)
The procedure below describes an easy way to recall the tare value to be used for weighing. When the
recalled tare value is to be changed, refer to "Storing the tare value".
1. Set the "Data memory (
data
)" parameter to "
4
".
2. Press the MODE key to enter the
quick selection
mode. After entering quick selection mode, display
shows tare value (blinking), “PT” mark and tare value
number. A prior selected setting value is displayed.
3. Press the MODE key to select the value. Each time
the MODE key is pressed, the displayed value
changes as follows:
(.....
t03
t04
........
t20
t01
...)
4. Press the PRINT key to confirm the selection. The
balance returns to the weighing mode with the selected
tare value ready for use.
Note To cancel the selection, press the CAL key. The
balance returns to the weighing mode.
Canceling the tare value data
Cancel the tare value data as follows:
1. Remove everything from the weighing pan and press
the RE-ZERO key to cancel the tare value
.
Tare number
Tare value to
be canceled.
Tare number
Tare value to
be used
Weighing is performed with
the setting in
t04
ready for
use.
Quick
selecti
on
Tare value
Summary of Contents for GF-10202M
Page 141: ...141 29 External Dimention Unit mm ...
Page 145: ...145 MEMO ...
Page 146: ...146 MEMO ...
Page 147: ......
