A1S Group Evo1-MCP 1, Technical Manual

Page: 45 / 84

Back to contents
Control Panel functions and programming
Enter PIN
Factory Config Reset
Press and hold the right hand button for 2 seconds to enter the programming
mode, keep pressing the right hand button to scroll through the menu, when
a function is visible the configuration on the bottom line can now be adjusted.
This is the pin code required to enter the programming mode, the pin is factory
set at 1234, press the right hand button 4 times to enter programming mode.
The will erase any settings previously stored and will default to the settings
below:
• Delay close 10 seconds
• Delay open 20 seconds
• 2 stage drop time 40 seconds
• 2 stage hold time 25 seconds
• Curtain open 60 seconds
• Curtain close 60 seconds
45