A1S Group Evo1-MCP 1, Technical Manual

Page: 59 / 84

Back to contents
Wiring of a smoke/heat detector
to the detector head
Wiring of a smoke/heat detector
To the control panel input 1 or 2
IC Brown
IC Black
C Grey
NC Blue
4 core cable is required
24v Brown
OV Blue
IN1 Grey
OV Black
Either input 1 (IN1) or 2 (IN2) can be configured
• Press right hand button on the control panel for 2 seconds to enter
programming mode, scroll by continually pressing until “spare input 1”
• Press the middle button to “fire alarm”
• Once set store by pressing the right button for 2 seconds “Save changes”
on LCD screen press middle button until “yes” Press the right button
for 2 seconds the screen returns to “Flameshield Evo 1” and is now out of
programming mode and in standby.
59