A1S Group Evo1-MCP 1, Technical Manual

Page: 62 / 84

Back to contents
2 core cable is required
The standard box has 3 cables
The red cable message is:
“Caution Fire Curtain Closing“
The blue cable is not used .
• Install the loop wire from 24v to common
on Relay 1 or relay 2
• Connect the black cable to 0V
• Connect the red cable to NO on the relay
Wiring of speak easy voice warning
Either relay 1 or relay 2 can be configured
• Press the right hand button on the control panel for 2 sec to enter programming
mode, scroll by continually pressing until “spare output 1 or 2”
• Is displayed Press the middle button and set to “fire alarm”
• Once set store by pressing the right button for 2 sec “Save changes” on LCD
screen press middle button until “yes”
• Press the right button for 2 sec the screen returns to “Flameshield Evo 1” and is
now out of programming mode and in standby.
62