A1S Group Evo1-MCP 1, Technical Manual

Page: 46 / 84

Back to contents
After a fire alarm signal has been detected a delay can be set in seconds
between 0 and 600 seconds, once set the curtain will remain in the retracted
position for the required time. This feature can be set in Increments of one
second.
• Press and release the centre button to increase the seconds.
• Press and hold the centre button to increase the seconds by 10.
• Press and release the left-hand button to decrease the seconds.
• Press and hold the left-hand button to decrease the seconds by 10.
• Press and release the right-hand button to move onto the next option.
After an alarm has been ceased a delay can be set in seconds between 0 and
600 seconds, once set the curtain will remain in the closed fire safe position for
the required time. This feature can be set in Increments of one second.
• Press and release the centre button to increase the seconds.
• Press and hold the centre button to increase the seconds by 10.
• Press and release the left-hand button to decrease the seconds.
• Press and hold the left-hand button to decrease the seconds by 10.
• Press and release the right-hand button to move onto the next option.
Delay before close
Delay before open
46