ENGLISH
4
Table of contents
1
ABOUT THIS MANUAL
5
2
NOTES
5
2.1 Applicable documents . . . . . . . . . . . . . . . . .5
2.2 Intended use. . . . . . . . . . . . . . . . . . . . .5
2.3 Unintended use . . . . . . . . . . . . . . . . . . .5
2.4 Installer qualifi cation. . . . . . . . . . . . . . . . . .5
2.5 Warning notices used . . . . . . . . . . . . . . . . .5
2.6 International colour code in accordance with IEC 757 . . . . .5
2.7 Symbols used . . . . . . . . . . . . . . . . . . . .5
3
SAFETY INSTRUCTIONS
6
3.1 Safety instructions for installation, maintenance, repair and
disassembly of the gate system . . . . . . . . . . . . .6
3.2 Safety instructions for installation. . . . . . . . . . . . .6
4
INSTALLATION
7
4.1 Checking and preparing the gate/gate system. . . . . . . .7
4.2 Installing the sliding opener . . . . . . . . . . . . . . .7
4.3 Gear rack installation . . . . . . . . . . . . . . . . .9
4.4 Installing and adjusting the end position magnets . . . . . .11
5
COMMISSIONING/CONNECTING ADDITIONAL
COMPONENTS
13
5.1 Information on electrical work . . . . . . . . . . . . . .13
5.2 Electrical connection of the opener . . . . . . . . . . . .13
5.3 Connecting the warning lights . . . . . . . . . . . . . .13
5.4 Connecting external lighting. . . . . . . . . . . . . . .14
5.5 Command inputs . . . . . . . . . . . . . . . . . . .14
5.6 Stop input . . . . . . . . . . . . . . . . . . . . . .14
5.7 Light barrier connection . . . . . . . . . . . . . . . .14
5.8 Closing edge protection . . . . . . . . . . . . . . . .15
5.9 Radio receiver . . . . . . . . . . . . . . . . . . . .15
6
STRUCTURE OF THE CONTROL
16
6.1 Display indicators . . . . . . . . . . . . . . . . . . .16
6.2 The
and
function buttons in normal mode . . . . . . .16
6.3 Buttons in programming mode and menu structure . . . . . .16
6.4 Programming mode (main menu 1) . . . . . . . . . . . .16
6.5 Settings in the function menu . . . . . . . . . . . . . .17
6.6 Settings in the time menu. . . . . . . . . . . . . . . .17
6.7 Settings in the value menu . . . . . . . . . . . . . . .17
6.8 Loading the standard values (main menu 5) . . . . . . . .17
6.9 Starting the self teach-in function for the run times
(main menu 4) . . . . . . . . . . . . . . . . . . . .17
7
CONFIGURING THE CONTROL
18
7.1 The confi guration menu . . . . . . . . . . . . . . . .18
7.2 Gate partially open position (pedestrian access) . . . . . . .19
7.3 Opening direction of the gate . . . . . . . . . . . . . .19
7.4 Pre-warning period warning light (terminals E4/E5)
in the open direction. . . . . . . . . . . . . . . . . .19
7.5 Pre-warning period warning light (terminals E4/E5)
in the close direction. . . . . . . . . . . . . . . . . .19
7.6 Running speed in the open direction . . . . . . . . . . .19
7.7 Running speed in the close direction . . . . . . . . . . .20
7.8 Soft running speed . . . . . . . . . . . . . . . . . .20
7.9 Start-up suppression . . . . . . . . . . . . . . . . .20
7.10 Warm-up ramp in the open direction . . . . . . . . . . .20
7.11 Warm-up ramp in the close direction . . . . . . . . . . .20
7.12 Soft stop in the open direction . . . . . . . . . . . . . .21
7.13 Soft stop in the close direction . . . . . . . . . . . . . .21
7.14 Start pulse (terminals J1/J4) when the gate is opening . . . .21
7.15 Start pulse (terminals J1/J4) when the gate is closing . . . . .21
7.16 Start pulse (terminals J1/J4) when the gate is opening . . . .22
7.17 Start pulse (START P, terminals J2/J4)
with pedestrian opening . . . . . . . . . . . . . . . .22
7.18 Automatic closing . . . . . . . . . . . . . . . . . . .22
7.19 Quick close after passage . . . . . . . . . . . . . . .22
7.20 Quick close after passage of both light barriers . . . . . . .22
7.21 Warning light (terminals E4/E5) during the pause time . . . .23
7.22 Command inputs (terminals J1/J4, J2/J4) function . . . . . .23
7.23 Stop input (terminals J3/J4) . . . . . . . . . . . . . . .23
7.24 Photocell 1 input (terminals J5/J9) . . . . . . . . . . . .24
7.25 Photocell 2 input (terminals J6/J9) . . . . . . . . . . . .24
7.26 Testing the safety devices . . . . . . . . . . . . . . .24
7.27 Closing edge protection 1 (terminals J7/J9) input . . . . . .24
7.28 Closing edge protection 2 (terminals J8/J9) input . . . . . .25
7.29 Evaluation of the closing edge protection. . . . . . . . . .25
7.30 Obstacle sensor in the open direction . . . . . . . . . . .25
7.31 Obstacle sensor in the close direction . . . . . . . . . . .25
7.32 Obstacle sensor in the open direction . . . . . . . . . . .26
7.33 Obstacle sensor in the close direction . . . . . . . . . . .26
7.34 Function of the option relay (terminals B1/B2) . . . . . . . .26
7.35 Radio receiver channel 2 function . . . . . . . . . . . .27
7.36 Warning/signal light output function . . . . . . . . . . . .27
7.37 ADI interface. . . . . . . . . . . . . . . . . . . . .27
7.38 End of programming. . . . . . . . . . . . . . . . . .27
7.39 Reading the cycle counter . . . . . . . . . . . . . . .28
7.40 Indicating maintenance due . . . . . . . . . . . . . . .28
8
OPERATION
29
8.1 Instructing personnel . . . . . . . . . . . . . . . . .29
8.2 Function check . . . . . . . . . . . . . . . . . . . .29
8.3 Conduct in the event of/following a power failure. . . . . . .29
9
INSPECTION, CHECKS AND MAINTENANCE
30
10 MALFUNCTIONS
31
10.1 LED MAINS does not switch on . . . . . . . . . . . . .31
10.2 LED OVERLOAD switched on . . . . . . . . . . . . . .31
10.3 Extended pre-warning period . . . . . . . . . . . . . .31
10.4 Opener runs at minimum speed in the open and close direction 31
10.5 The gate does not open or close fully . . . . . . . . . . .31
11 LOADING THE ERROR MEMORY (MAIN MENU 3) 31
12 ERROR TABLE
32
13 "-PRG" MENU FUNCTION OVERVIEW
34
14 "-CNT" MENU FUNCTION OVERVIEW
36
15 "-ERR" MENU FUNCTION OVERVIEW
36
16 "-LRN" MENU FUNCTION OVERVIEW
36
17 "-DEF" MENU FUNCTION OVERVIEW
36
18 CONNECTION OVERVIEW
38
19 CABLE LAYING DIAGRAM
40
20 DISASSEMBLY AND DISPOSAL
41
21 OPTIONAL ACCESSORIES
41
22 WARRANTY CONDITIONS
41
23 TECHNICAL DATA
41
Transmission and reproduction of this document, utilisation and
communication of its content are prohibited without express authorisation.
Contravention of this rule could lead to obligation to pay compensation.
All rights reserved with regard to patent claims or submission of design or
utility patent. Subject to modifi cation.
Summary of Contents for CX1024
Page 1: ...www 4ddoors com au instructions for fitting operating and maintenance Sliding operator CX1024 ...
Page 2: ...2 A B Ø 12 mm Ø 5 5 mm 17 mm 3 mm 2 17 5 mm 3 mm PIC 01 ...
Page 12: ...ENGLISH 12 DX SX DX SX 11 Figure 11 End positions Max 38 mm 102 mm 12 Figure 12 Distances ...
Page 37: ...ENGLISH 37 ...