4Ddoors CX1024, Instructions For Fitting, Operating And Maintenance

Page: 24 / 42

ENGLISH 24
7.24 Photocell 1 input (terminals J5/J9)
This menu allows you to activate light barrier type 1. This light barrier is active on
opening and closing, a gate movement is stopped immediately and prevented until the
light barrier is released.
The light barrier is installed inside the gate.
nEin The input is deactivated.
Input bridging is not necessary.
JA The input is activated.
7.25 Photocell 2 input (terminals J6/J9)
This menu allows you to activate light barrier type 2. This light barrier is active on
closing and when the gate is stationary and is installed in front of the gate (outside).
AUS The input is deactivated.
Input bridging is not necessary.
ZUPA The input is active on closing; gate closing is stopped immediately if the light
barrier is passed and the gate is opened again. In addition, the light barrier is
also active when the gate is stationary, i.e. if the light barrier is passed when
the gate is stationary, the gate cannot be opened or closed.
ZU The input is only active on closing.
7.26 Testing the safety devices
This menu allows you to activate testing of the connected safety devices. When this
option is activated, the function test is performed before each gate cycle. In the event
that a malfunction is detected, no gate movement takes place and the warning light
lights up for
5 sec .
nEIn Function is deactivated.
JA Testing is activated for light barriers.
Note
Activate light barrier testing to increase safety.
7.27 Closing edge protection 1 (terminals J7/J9) input
This menu allows you to activate the closing edge protection type 1 input. The input is
only active in the open direction.
nEin The input is deactivated.
Input bridging is not necessary.
JA The input is activated.
OK
OK
OK
Ï
Ï
Ï
Ð
Ð
Ð
OK
OK
OK
OK
Ï
Ï
Ï
Ï
Ð
Ð
Ð
Ð
OK
OK
OK
Ï
Ï
Ï
Ð
Ð
Ð
OK
OK
OK
Ï
Ï
Ï
Ð
Ð
Ð