3D Histech Pannoramic 250 FLASH II, User Manual, Page: 89 / 137

Pannoramic 250 FLASH II 1.18.1 User’s Guide 4 Software Description
Multi Filter Change Mode
This is for a multi-channel digitization. To optimize speed, filter change should take place
after the digitization of the slide with one channel. Filters should be changed for each field
of view if very precise colocalization is required, but consider that this option is more time
consuming.
•
Change filters after whole slide scan
•
Change filters at each field of view
Note :
Make sure to select the Change filters at each field of view option
if using multi band filter for multi-channel digitization.
Digital Slide Destination
This field determines where to digitize the virtual slides.
•
Select the Scan to CaseCenter function to scan slides directly to the dedicated
server.
For information on how to use the ScanToServer application, see section 4.7 Scan to
Server.
•
If you enable the Folder function, the virtual slides will be digitized in the specified
folder. You can browse for the folder with the Browse button. If you specify a folder
that does not exist, the software creates it.
All parameter inputs are saved for the next software session.
May 29, 2014 – Rev. 1 3DHISTECH Ltd.
89
(
137
)