Pannoramic 250 FLASH II 1.18.1 User’s Guide
4 Software Description
The camera changer changes the cameras according to the settings in the
Microscope Settings
options depending on the selected scan modes. It changes to the camera defined for Brightfield
scanning if
Brightfield
scan mode is selected, whereas it changes to the camera defined for
fluorescent scanning if
Fluorescent
scan mode is selected.
Note:
It is recommended to use specimens with identical staining for a given
batch of magazines in
Automatic
mode.
4.1.2 Exiting the software
If you close a mode or one of the options window the Mode selection window turns active again. To
exit the software, click
X
in the title bar of the Mode selection window, and the magazine(s) on the
input stack can be unloaded to the output stack automatically if clicking
Yes
in the appearing message
box.
4.2 Options
The
Options
menu can be activated from the main menu of the Mode selection window.
Figure 19 – Options menu
May 29, 2014 – Rev. 1
3DHISTECH Ltd.
37
(
137
)