3D Histech Pannoramic 250 FLASH II User Manual Download Page 50

Page: 50 / 137

Pannoramic 250 FLASH II 1.18.1 User’s Guide

4 Software Description

There are 2 feedback messages that come up after sending the e-mail:

◦

“An e-mail has been sent to the recipient.”

◦

“An error has been occurred. The e-mail could not be sent.”

- Check parameters then retry.

If you have properly set messenger settings, click

, then click

Users

in the Message Call

section of the Event Call Settings window to address functions to the recipients (that can be
selected under the

Send Message when:

field).

Figure 30 – Users window

4.3 Using Brightfield Manual Mode

You can use Brightfield Manual mode to set the scanning, preview, and image quality settings. You

can also set profile settings here, and start scanning in Brightfield Manual mode. This Manual mode is
perfect for digitizing slides that require unique settings, or single slides. You can also define profiles

here, which can be used in the Automatic mode.

For more information on profiles, see section

4.8

Using Profiles

; on Automatic mode, see section

May 29, 2014 – Rev. 1

3DHISTECH Ltd.

(

137

)

Summary of Contents for Pannoramic 250 FLASH II










































































































































Search results

Summary of Contents for Pannoramic 250 FLASH II

Reviews:

3D Histech Pannoramic 250 FLASH II, User Manual, Page: 50 / 137

Search results

Summary of Contents for Pannoramic 250 FLASH II

Reviews: