Pannoramic 250 FLASH II 1.18.1 User’s Guide
4 Software Description
The Preview panel offers options for threshold setting and selection of the area to be scanned. The
options in Automatic mode are the same as described in Manual mode.
In Automatic mode you cannot change the threshold values (it will use the threshold values that were
set previously in the Manual mode), and when activating the
Use selection box
option, the area
cannot be set.
For more information, see section
Note:
It is recommended to use profiles, since the Automatic mode does not
provide a preview image to check settings.
4.6.4 Focus panel
Figure 73 – Focus panel
Focus
You can define focus limits by selecting
Limit focus range
checkbox. You can set the upper
and lower limits by selecting the desired value in the selection boxes.
This is useful if focusing was not targeted on the specimen, but on a spot on the coverslip.
4.6.5 Service panel
Figure 74 – Service panel
May 29, 2014 – Rev. 1
3DHISTECH Ltd.
107
(
137
)