3Com VCX V7111, User Manual

Page: 49 / 464

3Com
®
VCX V7111 VoIP Gateway User Guide
49
Assigning an IP Address Using the CLI
First access the CLI using a standard Telnet application or using a serial communication
software (for example, HyperTerminal
TM
) connected to the V7111 RS-232 port (see Access
the CLI ). Then assign the V7111 an IP address (see Assign an IP Address ).
Access the CLI
To access the CLI using the Embedded Telnet Server:
1
Enable the Embedded Telnet Server:
a)
Access the V7111 Embedded Web Server (see Accessing the Embedded Web
Server ).
b)
Set the parameter Embedded Telnet Server (under Advanced Configuration >
Network Settings > Application Settings ) to Enable (Unsecured) or Enable Secured
(SSL).
c)
Click Maintenance on the main menu bar; the Maintenance Actions screen is
displayed.
d)
From the Burn to FLASH drop-down list, select Yes .
e)
Click Reset ; the V7111 is shut down and re-activated. A message about the waiting
period is displayed. The screen is refreshed.
2
Use a standard Telnet application to connect to the V7111 Embedded Telnet Server.
Note that if the Telnet server is set to SSL mode, a special Telnet client is required on
your PC to connect to the Telnet interface over a secured connection.
3
Login using the username (Admin) and password (Admin).
To access the CLI using the RS-232 port:
1
Connect the RS-232 port to your PC (For the V7111 24 PORT, see
Connecting the
V7111 24 PORT RS-232 Port to Your PC ). For the V7111 1x PORT, see Connecting the
V7111 1x PORT RS-232 Port to Your PC ).
2
Use serial communication software (for example, HyperTerminal
TM
) to connect to the
V7111 gateway.
Set your serial communication software to the following communications port settings:
ƒ Baud Rate: 115,200 bps (V7111 24 PORT), 9,600 bps (V7111 1x PORT)
ƒ Data bits: 8
ƒ Parity: None
ƒ Stop bits: 1
ƒ
Flow control: None
The CLI prompt becomes available.