3Com VCX V7111, User Manual

Page: 226 / 464

226
3Com
®
VCX V7111 VoIP Gateway User Guide
Figure 90
End Process Screen
11
Click the End Process button; the Quick Setup screen appears and the full Web
application is reactivated.
Auxiliary Files
The Auxiliary Files screen enables you to load to the gateway the following files: Call
Progress Tones, coefficient, Prerecorded Tones (PRT) and User Information. The Voice
Prompts file is currently not applicable to the V7111. For detailed information on these files,
see
Chapter 6: ini File Configuration of the V7111 . For information on deleting these files
from the V7111, see Device Information . Table 77 presents a brief description of each
auxiliary file.
Table 77
Auxiliary Files Descriptions
File Type Description
FXS Coefficient This file contains the telephony interface configuration information for the VoIP
gateway. This information includes telephony interface characteristics, such as DC and
AC impedance, feeding current and ringing voltage. This file is specific to the type of
telephony interface that the VoIP gateway supports. In most cases you have to load
this type of file.
Use the parameter CountryCoefficients (described in Table 49 ) to configure
the FXO coefficients.
Call Progress
Tones
This is a region-specific, telephone exchange-dependent file that contains the Call
Progress Tones levels and frequencies that the VoIP gateway uses. The default CPT
file is: U.S.A.
Prerecorded Tones The dat PRT file enhances the gateways capabilities of playing a wide range of
telephone exchange tones that cannot be defined in the Call Progress Tones file.
User Information
The User Information file maps PBX extensions to IP numbers. This file can be used to
represent PBX extensions as IP phones in the global IP world.