3Com VCX V7111, User Manual, Page: 409 / 464

3Com
®
VCX V7111 VoIP Gateway User Guide
409
To open the BootP/TFTP:
3
From the Start menu on your computer, navigate to Programs and then click BootP .
4
The first time that you run the BootP/TFTP, the program prompts you to set the user
preferences. See
Setting the Preferences for information on setting the preferences.
Loading the cmp File, Booting the Device
Once the application is running, and the preferences were set (see Setting the Preferences ),
for each unit that is to be supported, enter parameters into the tool to set up the network
configuration information and initialization file names. Each unit is identified by a MAC
address. For information on how to configure (add, delete and edit) units, see
Configuring
the BootP Clients .
To load the software and configuration files:
1
Create a folder on your computer that contains all software and configuration files that
are needed as part of the TFTP process.
2
Set the BootP and TFTP preferences (see Setting the Preferences ).
3
Add client configuration for the VoIP gateway that you want to initialize by the BootP, see
Adding Clients .
4
Reset the VoIP gateway, either physically or remotely, causing the device to use BootP
to access the network and configuration information.
BootP/TFTP Application User Interface
Figure 145 shows the main application screen for the BootP/TFTP utility.
Figure 145
Main Screen
Log Window