3Com VCX V7111, User Manual, Page: 417 / 464

3Com
®
VCX V7111 VoIP Gateway User Guide
417
Deleting Clients
To delete a client from the BootP Tool:
1
Select the client that you wish to delete by clicking on the line in the window for that
client.
2
Click the Delete Current Client button
; a warning pops up.
3
To delete the client, click Yes .
Editing Client Parameters
To edit the parameters for an existing client:
1
Select the client that you wish to edit by clicking on the line in the window for that client.
2
Parameters for that client display in the parameter fields on the right side of the window.
3
Make the changes required for each parameter.
4
Click Apply to save the changes, or click Apply & Reset to save the changes and send a
reset message to that gateway to immediately implement the settings.
To use Apply & Reset you must enable ARP Manipulation in the Preferences
window. Also, you must have administrator privileges for the computer you are using.
Testing the Client
There should only be one BootP utility supporting any particular client MAC active on the
network at any time.
To check if other BootP utilities support this client:
1
Select the client that you wish to test by clicking the client name in the main area of the
Client Configuration Window .
2
Click the Test Selected Client button
.
3
Examine the Log Window on the Main Application Screen. If there is another BootP utility
that supports this client MAC, there is a response indicated from that utility showing the
status Listed At along with the IP address of that utility.
4
If there is another utility responding to this client, you must remove that client from either
this utility or the other one.