3Com Switch 7754, Configuration Manual

Page: 43 / 940

Console Port Login Configuration with Authentication Mode Being Password 43
Enter AUX user interface
view user-interface aux 0 -
Configure to
authenticate users using
the local password authentication-mode
password Required
By default, users logging into a switch
through the Console port are not
authenticated; while those logging in
through Modems or Telnet are
authenticated.
Set the local password set authentication
password
{ cipher |
simple } password
Required
Configure
the
Console
port Set the
baud rate speed speed-value Optional
The default baud rate of an AUX port
(also the Console port) is 9,600 bps.
Set the
check
mode parity { even | mark |
none | odd | space }
Optional
By default, the check mode of a
Console port is set to
none , that is, no
check bit.
Set the
flow
control
mode flow-control { hardware
| none | software }
Optional
By default, a Console port does not
perform flow control.
Set the
stop bits stopbits { 1 | 1.5 | 2 } Optional
The default stop bits of a Console port
is 1.
Set the
data bits databits { 7 | 8 } Optional
The default data bits of a Console port
is 8.
Configure the command
level available to users
logging into the user
interface user privilege level level Optional
By default, commands of level 3 are
available to users logging into the
AUX user interface.
Make terminal services
available to the user
interface shell Optional
By default, terminal services are
available in all user interfaces.
Set the maximum
number of lines the
screen can contain screen-length
screen-length
Optional
By default, the screen can contain up
to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Set history command
buffer size history-command
max-size
value
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands
by default.
Table 16 Console port login configuration with the authentication mode being password
Operation Command Description