manualshive.com logo in svg

3Com Switch 7754, Configuration Manual, Page: 631 / 940

Share
Download
3Com Switch 7754 Configuration Manual Download Page 631

DHCP Snooping Configuration

631

n

■

If you configure a remote ID sub-option in both system view and on a port, the 
remote ID sub-option configured on the port applies when the port receives a 
packet, and the global remote ID applies to other interfaces that have no 
remote ID sub-option configured.

■

If you have configured a remote ID with the 

vlan

 vlan-id argument specified, 

and the other one without the argument in Ethernet port view, the former 
remote ID applies to the DHCP messages from the specified VLAN, while the 
latter one applies to DHCP messages from other VLANs.

■

In a port aggregation group, you can use this command to configure the 
primary and member ports respectively. When Option 82 is added, however, 
the remote ID is subject to the one configured on the primary port.

■

The remote ID configured on a port will neither be synchronized in the case of 
port aggregation.

Configuring the padding format for Option 82

Configuring IP Filtering

Table 503   

Configure the remote ID sub-option in Option 82

Operation Command Description 

Enter system view 

system-view

 - 

Configure the remote ID 
sub-option in system view 

dhcp-snooping information 
remote-id

{

sysname | 

string

 

string

} 

Optional

By default, the remote ID 
sub-option is the MAC 
address of the DHCP 
snooping device that received 
the DHCP client’s request. 

Enter Ethernet port view 

interface

 

interface-type 

interface-number

 

- 

Configure the remote ID 
sub-option in Ethernet port 
view 

dhcp-snooping information

 

[

vlan

 

vlan-id

] 

remote-id 

string

 

string

 

Optional

By default, the remote ID 
sub-option is the MAC 
address of the DHCP 
snooping device that received 
the client’s request.

Table 504   

Configure the padding format for Option 82

Operation Command Description 

Enter system view 

system-view

 - 

Configure the padding format 

dhcp-snooping information 
packet-format

{

extended | 

standard

} 

Optional

By default, the padding 
format is in extended format.

Table 505   

Configure IP filtering

Operation Command Description 

Enter system view 

system-view

 - 

Enter Ethernet port view 

interface

 

interface-type 

interface-number

 

- 

Enable IP filtering 

ip check source ip-address

 

[

mac-address

] 

Required

By default, this function is 
disabled. 

Summary of Contents for Switch 7754













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments