3Com Switch 7754, Configuration Manual

Page: 21 / 940

Command Level/Command View 21
CLI Views CLI views are designed for different configuration tasks. They are interrelated. You
will enter user view once you log into a switch successfully, where you can perform
operations such as displaying operation status and statistical information. In
addition, by executing the
system-view command, you can enter system view,
where you can enter other views by executing the corresponding commands.
The following CLI views are provided:
■
User view
■
System view
■
M-Ethernet interface view
■
Ethernet port view
■
Null interface view
■
Tunnel interface view
■
AUX interface view
■
VLAN view
■
VLAN interface view
■
Loopback interface view
■
Local user view
■
User interface view
■
FTP client view
■
SFTP client view
■
Cluster view
■
DHCP address pool view
■
MST region view
■
RRPP domain view
■
MSDP region view
■
Port-isolate-group view
■
HWping view
■
Public key view
■
Public key code view
■
PIM view
■
RIP view
■
OSPF view
■
OSPF area view
Configure the level of
a specific command in
a specific view command-privilege level level
view view command
Required
Use this command with caution to
prevent inconvenience on
maintenance and operation.
Table 3 Configure the level of a specific command in a specific view
Operation Command Description