manualshive.com logo in svg

3Com Switch 7754, Configuration Manual, Page: 469 / 940

Share
Download
3Com Switch 7754 Configuration Manual Download Page 469

Common PIM Configuration

469

Figure 117   

Diagram for multicast source registration

 

When RP receives the registration information from S, it will decapsulate the 
registration information and forward the multicast information to the receiver 
along RPT, and on the other hand, it will send (S, G) join messages to S hop by 
hop. The passed routers constitute a branch of SPT. The multicast source S is the 
root of SPT and RP is the destination of RP.

The multicast information sent by the multicast source S will reach RP along the 
built SPT, and then RP will forward the multicast information along the built RPT.

Switching RPT to SPT

When the multicast router nearest to the receiver detects that the rate of the 
multicast packet from RP to the multicast group G exceeds the threshold value, it 
will send (S, G) join messages to the upper-layer router of the multicast source S. 
The join message reaches the router nearest to the multicast source (namely, the 
first hop router) hop by hop and all the passed routers have the (S, G) entry. As a 
result, a branch of SPT is built.

Then, the last hop router sends Prune message with the RP bit to RP hop by hop. 
When RP receives the message, it will reversely forward the Prune message to the 
multicast source. Thus, the multicast information stream is switched from RPT to 
SPT.

After the switch from RPT to SPT, the multicast information will be sent from the 
multicast source S to the receiver directly. Through the switching from RPT to SPT, 
PIM-SM can build SPT in a more economical way than PIM-DM.

The related threshold values are not set on Switch 7750 Ethernet switches. When 
the switch receives multicast data forwarded along RPT, it will update the input 
interface automatically and sends Prune messages to RP.

Common PIM 
Configuration

You can configure the PIM feature of the switch in interface view. The 
configuration includes:

Source

Server

Host A

Host B

Host C

Receiver

Receiver

Multicast packets

SPT

Join message

Register message

RP

DR

Summary of Contents for Switch 7754













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments