Introduction to 802.1x
397
■
Supplicant system timer (
supp-timeout
): This timer sets the supp-timeout
period and is triggered by the switch after the switch sends a request/challenge
packet to a supplicant system. The switch sends another request/challenge
packet to the supplicant system if the supplicant system fails to respond when
this timer times out.
■
RADIUS server timer (
server-timeout
): This timer sets the server-timeout
period. The switch sends another authentication request packet if the RADIUS
server fails to respond when this timer times out.
■
Handshake timer (
handshake-period
): This timer sets the handshake-period
and is triggered after a supplicant system passes the authentication. It sets the
interval for a switch to send handshake request packets to online users. If you
set the number of retries to N by using the
dot1x retry
command, an online
user is considered offline when the switch does not receive response packets
from it in a period N times of the handshake-period.
■
Re-authentication timer (
reauth-period
): Within this timer period, a supplicant
system initializes 802.1x re-authentication.
■
Quiet-period timer (
quiet-period
): This timer sets the quiet-period. When a
supplicant system fails to pass the authentication, the switch quiets for the set
period (set by the quiet-period timer) before it processing another
802.1x-relatedauthentication request initiated by the supplicant system.
■
ver-period
: This timer sets the client version request timer. If the supplicant
system does not send the version response packets within the set period, the
switch sends another version request packet.
802.1x Implementation
on the Switch 7750
In addition to the earlier mentioned 802.1x features, a Switch 7750 is also capable
of the following:
■
Cooperating with a CAMS server to perform proxy detection, such as detecting
login through proxy and multiple network adapters
■
Checking client version
■
Implementing the Guest VLAN function
Proxy detection
A Switch 7750 implements 802.1x proxy detection to check:
■
Supplicant systems logging on through proxies
■
Supplicant systems logging on through IE proxies
■
Whether or not a supplicant system logs in through more than one network
modules (that is, whether or not more than one network adapters are active in
a supplicant system when the supplicant system logs in).
In response to any of the three cases, a switch can optionally take the following
measures:
■
Disconnect the supplicant system and send Trap packets (achieved via the
dot1x supp-proxy-check logoff
command.)
■
Send Trap packets without disconnecting the supplicant system (achieved via
the
dot1x supp-proxy-check trap
command.)
This function needs the support of 802.1x clients and CAMS:
Summary of Contents for Switch 7754
