3Com Switch 4210 52-Port Configuration Manual Download Page 48

Page: 48 / 870

5-11

CLI Features

Online Help

When configuring the switch, you can use the online help to get related help information. The CLI

provides two types of online help: complete and partial.

Complete online help

1) Enter a question mark (?) in any view on your terminal to display all the commands available in the

view and their brief descriptions. The following takes user view as an example.

<Sysname> ?

User view commands:

boot Set boot option

cd Change current directory

clock Specify the system clock

cluster Run cluster command

copy Copy from one file to another

debugging Enable system debugging functions

delete Delete a file

dir List files on a file system

display Display current system information

2) Enter a command, a space, and a question mark (?).

If the question mark “?” is at a keyword position in the command, all available keywords at the position

and their descriptions will be displayed on your terminal.

<Sysname> clock ?

datetime Specify the time and date

summer-time Configure summer time

timezone Configure time zone

If the question mark “?” is at an argument position in the command, the description of the argument will

be displayed on your terminal.

[Sysname] interface vlan-interface ?

<1-4094> VLAN interface number

If only <cr> is displayed after you enter “?”, it means no parameter is available at the “?” position, and

you can enter and execute the command directly.

[Sysname] interface vlan-interface 1 ?

<cr>

Partial online help

1) Enter a character/string, and then a question mark (?) next to it. All the commands beginning with

the character/string will be displayed on your terminal. For example:

<Sysname> p?

ping

pwd

2) Enter a command, a space, a character/string and a question mark (?) next to it. All the keywords

beginning with the character/string (if available) are displayed on your terminal. For example:

Summary of Contents for Switch 4210 52-Port







































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Switch 4210 52-Port

Reviews:

Related manuals for Switch 4210 52-Port

Brands by name

Popular brands

3Com Switch 4210 52-Port, Configuration Manual

Search results

Summary of Contents for Switch 4210 52-Port

Reviews:

Related manuals for Switch 4210 52-Port

Brands by name

Popular brands