2-29
Operation
Command
Remarks
Display information about user
connections
display
connection
[
access-type
{
dot1x
|
mac-authentication
} |
domain
isp-name
|
interface interface-type interface-number
|
ip
ip-address
|
ipv6 ipv6-address | mac
mac-address
|
radius-scheme
radius-scheme-name
|
hwtacacs-scheme
hwtacacs-scheme-name
|
vlan
vlan-id
|
ucibindex ucib-index
|
user-name user-name
]
Display information about local
users
display local-user
[
domain
isp-name
|
idle-cut
{
disable
|
enable
} |
vlan
vlan-id
|
service-type
{
ftp
|
lan-access
|
ssh
|
telnet
|
terminal
} |
state
{
active
|
block
} |
user-name
user-name
]
command in
any view.
Table 2-33
Display and maintain RADIUS protocol information
Operation
Command
Remarks
Display RADIUS message
statistics about local RADIUS
authentication server
display local-server statistics
Display configuration
information about one specific
or all RADIUS schemes
display radius scheme
[
radius-scheme-name
]
Display RADIUS message
statistics
display radius statistics
Display buffered non-response
stop-accounting requests
display stop-accounting-buffer
{
radius-scheme
radius-scheme-name
|
session-id
session-id
|
time-range
start-time
stop-time
|
user-name
user-name
}
You can execute
the
display
command in any
view.
Delete buffered non-response
stop-accounting requests
reset stop-accounting-buffer
{
radius-scheme
radius-scheme-name
|
session-id
session-id
|
time-range
start-time
stop-time
|
user-name
user-name
}
Clear RADIUS message
statistics
reset radius statistics
You can execute
the
reset
command in user
view.
Table 2-34
Display and maintain HWTACACS protocol information
Operation
Command
Remarks
Display the configuration or
statistic information about one
specific or all HWTACACS
schemes
display hwtacacs
[
hwtacacs-scheme-name
[
statistics
] ]
Display buffered non-response
stop-accounting requests
display stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
You can execute the
display
command in
any view.
Clear HWTACACS message
statistics
reset hwtacacs statistics
{
accounting
|
authentication
|
authorization
|
all
}
You can execute the
reset
command in user
view.