1-8
Displaying and Maintaining PoE
To do…
Use the command…
Remarks
Display the mapping between
ID, module, and member ID of
all PSEs.
display poe device
Display the power state and
information of the specified
PoE interface
display poe interface
[
interface-type
interface-number
]
Display the power information
of a PoE interface(s)
display poe interface power
[
interface-type
interface-number
]
Display the information of PSE
display poe pse
[
pse-id
]
Display the power state and
information of all PoE
interfaces connected with the
PSE
display poe pse
pse-id
interface
Display the power of all PoE
interfaces connected with the
PSE
display poe pse pse-id
interface power
Display all information of the
configurations and applications
of the PoE configuration file
display poe-profile
[
index
index
|
name profile-name
]
Display all information of the
configurations and applications
of the PoE configuration file
applied to the specified PoE
interface
display poe-profile interface
interface-type interface-number
Available in any view
PoE Configuration Example
Network requirements
The device provides power supply for PDs through PoE interfaces.
z
GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IP telephones.
z
GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 are connected to access point (AP) devices.
z
The power priority of GigabitEthernet 1/0/2 is critical.
z
The power of the AP device connected to GigabitEthernet 1/0/11 does not exceed 9,000 milliwatts.
