3Com 4500G Series Configuration Manual Download

Page: 635 / 1206

1-2

Local MAC Authentication

In local MAC authentication, the device performs authentication of users locally and different items

need to be manually configured for users on the device according to the specified type of username:

If the type of username is MAC address, a local user must be configured for each user on the

device, using the MAC address of the accessing user as both the username and password.

If the type of username is fixed username, a single username and optionally a single password are

required for the device to authenticate all users.

Related Concepts

MAC Authentication Timers

The following timers function in the process of MAC authentication:

Offline detect timer: At this interval, the device checks to see whether there is traffic from a user.

Once detecting that there is no traffic from a user within this interval, the device logs the user out

and sends to the RADIUS server a stop accounting request.

Quiet timer: Whenever a user fails MAC authentication, the device does not perform MAC

authentication of the user during such a period.

Server timeout timer: During authentication of a user, if the device receives no response from the

RADIUS server in this period, it assumes that its connection to the RADIUS server has timed out

and forbids the user to access the network.

Quiet MAC Address

When a user fails MAC authentication, the MAC address becomes a quiet MAC address, which means

that any packets from the MAC address will be discarded silently by the device until the quiet timer

expires. This prevents the device from authenticating an illegal user repeatedly in a short time.

If a quiet MAC address is the same as a static MAC address configured or an MAC address that has

passed another type of authentication, the quiet function does not take effect.

VLAN Assigning

For separation of users from restricted network resources, users and restricted resources are usually

put into different VLANs. After a user passes identity authentication, the authorization server assigns to

the user the VLAN where the restricted resources reside as an authorized VLAN, and the port through

which the user accesses the device will be assigned to the authorized VLAN. As a result, the user can

access those restricted network resources.

Guest VLAN of MAC Authentication

Guest VLAN allows unauthenticated users to access a specified VLAN, where the users can, for

example, download or upgrade the client software, or execute some user upgrade programs. This

VLAN is called the guest VLAN.

Summary of Contents for 4500G Series























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 4500G Series

Reviews:

Related manuals for 4500G Series

Brands by name

Popular brands

3Com 4500G Series, Configuration Manual

Search results

Summary of Contents for 4500G Series

Reviews:

Related manuals for 4500G Series

Brands by name

Popular brands