1-16
# Disable the output of log, trap, and debugging information of all modules on channel
loghost
.
[Sysname] info-center source default channel loghost debug state off log state off trap state
off
As the default system configurations for different channels are different, you need to disable the output
of log, trap, and debugging information of all modules on the specified channel (
loghost
in this example)
first and then configure the output rule as needed so that unnecessary information will not be output.
# Configure the information output rule: allow log information of all modules with severity equal to or
higher than
informational
to be output to the log host.
[Sysname] info-center source default channel loghost log level informational state on
2) Configure the log host
Step 1: Log in to the log host as a root user.
Step 2: Create a subdirectory named
Device
under directory
/var/log/
, and create file
info.log
under
the
Device
directory to save logs of
Device
.
# mkdir /var/log/Device
# touch /var/log/Device/info.log
Step 3: Edit file
/etc/syslog.conf
and add the following contents.
# Device configuration messages
local5.info /var/log/Device/info.log
In the above configuration,
local5
is the name of the logging facility used by the log host to receive logs.
info
is the information level. The Linux system will record the log information with severity level equal to
or higher than
informational
to file
/var/log/Device/info.log
.
Be aware of the following issues while editing file
/etc/syslog.conf
:
z
Comments must be on a separate line and begin with the # sign.
z
No redundant spaces are allowed after the file name.
z
The logging facility name and the information level specified in the
/etc/syslog.conf
file must be
identical to those configured on the device using the
info
-
center loghost
and
info-center source
commands; otherwise the log information may not be output properly to the log host.
Step 4: After log file
info.log
is created and file
/etc/syslog.conf
is modified, you need to issue the
following commands to display the process ID of
syslogd
, kill the
syslogd
process, and restart
syslogd
using the
-r
option to make the modified configuration take effect.
# ps -ae | grep syslogd
147
# kill -9 147
