1-30
Min positive SD: 3 Min positive DS: 1
Max positive SD: 30 Max positive DS: 79
Positive SD number: 186 Positive DS number: 158
Positive SD sum: 2602 Positive DS sum: 1928
Positive SD average: 13 Positive DS average: 12
Positive SD square sum: 45304 Positive DS square sum: 31682
Min negative SD: 1 Min negative DS: 1
Max negative SD: 30 Max negative DS: 78
Negative SD number: 181 Negative DS number: 209
Negative SD sum: 181 Negative DS sum: 209
Negative SD average: 13 Negative DS average: 14
Negative SD square sum: 46994 Negative DS square sum: 3030
One way results:
Max SD delay: 46 Max DS delay: 46
Min SD delay: 7 Min DS delay: 7
Number of SD delay: 410 Number of DS delay: 410
Sum of SD delay: 3705 Sum of DS delay: 3891
Square sum of SD delay: 45987 Square sum of DS delay: 49393
SD lost packet(s): 0 DS lost packet(s): 0
Lost packet(s) for unknown reason: 0
The
display nqa history
command cannot show you the results of UDP jitter tests. Therefore, to know
the result of a UDP jitter test, you are recommended to use the
display nqa result
command to view
the probe results of the latest NQA test, or use the
display nqa statistics
command to view the
statistics of NQA tests.
SNMP Test Configuration Example
Network requirements
Use the NQA SNMP query function to test the time it takes for Device A to send an SNMP query packet
to the SNMP agent and receive a response packet.
Figure 1-8
Network diagram for SNMP tests
Configuration procedure
1) Configurations on SNMP agent.
# Enable the SNMP agent service and set the SNMP version to
all
, the read community to
public
, and
the write community to
private
.
