1-31
Displaying and Maintaining RADIUS
To do…
Use the command…
Remarks
Display the configuration
information of a specified
RADIUS scheme or all RADIUS
schemes
display radius scheme
[
radius-scheme-name
]
Available in any view
Display statistics about RADIUS
packets
display radius statistics
Available in any view
Display information about
buffered stop-accounting
requests that get no responses
display stop-accounting-buffer
{
radius-scheme
radius-server-name
|
session-id
session-id
|
time-range
start-time
stop-time
|
user-name
user-name
}
Available in any view
Clear RADIUS statistics
reset radius statistics
Available in user view
Clear buffered stop-accounting
requests that get no responses
reset stop-accounting-buffer
{
radius-scheme
radius-server-name
|
session-id
session-id
|
time-range
start-time
stop-time
|
user-name
user-name
}
Available in user view
Configuring HWTACACS
Different from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses of
the HWTACACS servers, you can make any changes to HWTACACS parameters, whether there are
users online or not.
Creating a HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create a HWTACACS scheme and enter HWTACACS scheme
view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a HWTACACS scheme
and enter HWTACACS scheme
view
hwtacacs scheme
hwtacacs-scheme-name
Required
Not defined by default
