92 / 121
User Manual 3000SP
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
12.
Monitoring systems
12.1.
External Wi-Fi adapter
12.1.1.
Installation
Unlike the internal Wi-Fi card, the external adapter must be installed for all compatible inverters. However,
the procedure is quicker and easier as there is no need to open the front cover of the inverter.
In order to monitor the inverter, the RS485 communication address must be set to 01 directly from the
display.
Installation tools:
Cross screwdriver
External Wi-Fi adapter
1)
Switch off the inverter following the procedure described in this manual.
2)
Remove the cover for accessing the Wi-Fi connector on the bottom of the inverter by unscrewing the two
cross-head screws (a), or by unscrewing the cover (b), as shown in the figure.
(a)
(b)
Figure 57 – Port for external Wi-Fi adapter
