57 / 128
Identification: MD-AL-GI-00
Rev. 1.0 of 21/07/2021 - Application: GID
User’s Manual 1PH 3000TLM-6000TLM-V3
Rev. 1.0 21/07/2021
10.EnDRMs
11.Power Ratio
The user enters the main menu by long pressing the DOWN button, short press and turns the page to select
menu contents, then long press the button to enter "3. SystemInfo". Turning the page down can select the
system information to view.
(D)
Display time
Long press the DOWN button and short press the button to turn the page in the standard user interface to
enter into “4. Display Time”, then long press the DOWN button to display the current system time.
(E)
Software Update
User can update software by USB flash disk, Zucchetti Centro Sistemi S.p.a. will provide the new update
software called firmware for user if it is necessary, the user needs to copy the upgrade file to the USB flash
disk.
6.4.
Updating Inverter Software
1PH 3000TLM-6000TLM-V3
inverter offer software upgrade via USB flash drive to maximize inverter
performance and avoid inverter operation error caused by software bugs.
Step 1
：
turn off AC circuit breaker and DC switch, remove the communication board cover as below figure.
If the RS485 line has been connected, please release the waterproof nut first and make sure the
communication line is no longer the force. Then remove the waterproof cover.
Figure 37 - Remove communication broad cover
