17 / 128
Identification: MD-AL-GI-00
Rev. 1.0 of 21/07/2021 - Application: GID
User’s Manual 1PH 3000TLM-6000TLM-V3
Rev. 1.0 21/07/2021
If enable the limited of active power function, inverter can limit the amount of active power fed into the
grid to the desired value (expressed as percentage).
D.
Self-power reduction when grid is over frequency
If grid frequency is higher than the limited value, inverter will reduce the output power to ensure the
grid stability.
E.
Data transmission
Inverter or a group of inverters can be monitored remotely through an advanced communication
system based on RS485 interface or via USB port.
F.
Software update
USB interface for uploading the firmware, remotely uploading by using USB acquisition stick
(WIFI/Ethernet/GPRS) is also available.
2.3.
Electrical block diagram
Figure 6 – Schematic diagram
