26 / 128
Identification: MD-AL-GI-00
Rev. 1.0 of 21/07/2021 - Application: GID
User’s Manual 1PH 3000TLM-6000TLM-V3
Rev. 1.0 21/07/2021
3.5.
Moving the 1PH 3000TLM-6000TLM-V3 inverter
Unload the inverter from package, horizontally move to the install position. When open the package, at least
two operators insert the hands to the back of heat sink part.
Figure 5 – Removing the polystyrene protections
Figure 6 – Removing the inverter from its packaging
To prevent damage and personal injury, hold the inverter firmly when moving, as
it is a heavy piece of equipment.
Do not position the inverter with the input/output terminals in contact with
other surfaces, as these are not designed to support the weight of the inverter.
Always position the inverter horizontally.
When placing the inverter on the floor, make sure to place a support under the
unit to protect its front door.
Attention
