9 / 128
Identification: MD-AL-GI-00
Rev. 1.0 of 21/07/2021 - Application: GID
User’s Manual 1PH 3000TLM-6000TLM-V3
Rev. 1.0 21/07/2021
1PH 3000TLM-6000TLM-V3 has warming symbol attached the product which contact information of safety
operation. The warming symbol must permanent attached to the product.
Installation location requirement
Please install the inverter according to the following section. Place inverter in an appropriate bearing
capacity objects (such as solid brick wall, or strength equivalent mounting surface, etc.) and make sure
inverter vertical placed. A proper installation location must have enough space for fire engine access in
order for maintenance if faulty occur. Ensure the inverter is installed in a wall ventilated environment and
have enough air-cooling cycle. Air humidity should less than 90%.
Figure 1 – Do not lose or damage this manual
Transportation Requirement
Inverter is in the good electrical and physical condition when it ship out from factory. During transport,
inverter must be placed in its original package or other proper package. Transportation company should
responsible for any damage during transport period.
If you find any packing problems that may cause the damage of inverter or any visible damage, please notice
the responsible transportation company immediately. You can ask your installer or Zucchetti Centro Sistemi
S.p.A. for help is
necessary.
Electrical Connection
Please comply with all the current electrical regulations about accident prevention in dealing with the
current inverter.
