36 / 128
Identification: MD-AL-GI-00
Rev. 1.0 of 21/07/2021 - Application: GID
User’s Manual 1PH 3000TLM-6000TLM-V3
Rev. 1.0 21/07/2021
Figure 15 - Connecting the DC input power cables (3)
Note:
Insert the caps into the unused DC connectors.
Removal procedure
To remove the positive and negative connectors from the inverter, insert a removal tool in the bayonet
coupling and press the tool with adequate force, as shown in the figure below.
Before removing the positive and negative connectors, make sure that the
inverter’s circuit breaker is switched off. If not, the direct current may cause
an electric arc that could result in a fire
Warning
Figure 16 – Removing the DC connector
