Zonex ZonexCommander, Руководство по установке

Страница: 4 / 54

4
ZONEX COMPONENT DESCRIPTIONS
providing remote communication with all RTUs or splits in your
system. The
ZonexCommander eliminates the need to continually set
building. ZonexCommander bridges the gap between ineffective
stand-alone thermostats and expensive and complex automation systems.
COMMAND CENTERS
The Command Center is a microprocessor based digital communicating
controller. Each Command Center supports up to 20 devices (thermostats
ZonexCommander
ZonexCommander (Plus)
The Command Centers communicate with the computer through the RS-232
link, and communications with thermostats or devices communicate
through the RS-485 link using a daisy chained two-wire twisted pair
(Belden 8740).
not affected by power interruptions.
The Command Centers are powered by dedicated 24vac 40va, field
supplied transformers.
Each Command Center must have its own
Part #CETCIP
network device, for 20 communicating devices.
ZONEXCOMMANDER COMMAND CENTER
ZPTCIP – ZonexCommander (Plus) Communications Package with
ZONEXCOMMANDER (PLUS) COMMAND CENTER
ZonexCommander (Plus) is designed to provide centralized control
support up to 16 HVAC units with 80 zones. The thermostats are allo-
cated to the
RMOD
controller through ZonexCommander (Plus)
software.
RMODs and another 20 additional communicating devices.
CZNXIP Command Center with TCIP – supports 4 additional
RMOD controllers, each controlling one HV AC unit. CZNXIP Com-
mand Centers via TCIP device provide expansion capability to
to 20 devices ( ModStat, MODS2, DIGICOM thermostats and
for multiple zoned HVAC systems. Each Command Center supports up
For use with ZonexCommander (Plus) systems only
capacity control. The
with the Command
Center and thermostats
assigned to that
RMOD.
Each thermostat can
to the RMOD . The RMOD
polls the number of heat
or cool calls every
minute and energizes
the unit based on our
control algorithm of
controls a zoned GE or
RMOD communicates
HP unit with on-board
send a heat or cool call
The DIGICOM and DIGIHP thermostats are used to control stand-
A unique Command Center exists for each communicating Zonex System::
CETCIP – ZonexCommander Communications Package with TCIP
first call first served, majority wins on changeover..
COMCIP – Command center with TCIP – adds 20 additional com-
municating devices for larger systems.
THERMOSTATS
RLYCOMs ). Each ZPTCIP Command Center controls up to four
RMOD – UNIT RELAY MODULE
alone Gas Electric (2H/2C) or Heat Pump (3H/2C) HVAC systems.
transformer power supply.
and reset multiple programmable thermostats located throughout your r
The ZonexCommander automates and networks 1-80 HVAC units,
Please review integral components of the Zonex Systems below.
and RLYCOM relay modules).
Each Command Center maintains Day, Date, Time and Year with battery
tags and addresses are programmed into non-volatile memory, which is
backup. All Occupied, Unoccupied and Vacation schedules, device name
Each Command Center can support 4 RMODs . Each Universal RMOD
TCIP network device for internet communications, for 1-4 RMODs
with 20 communicating devices. Includes system operating software.