Zipro Iluzion, Руководство пользователя, Страница: 19 / 125

19
EN
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed
material and can be recycled. Throw the materials to appropriate
colour containers for selective waste collection.
Protect the environment and do not throw used batteries
into household wastes. Return them to the point of sale
or a special recycling centre.
Used electrical equipment (including the computer and
power supply) are recyclable. Do not throw them out with
household waste as they may contain substances dangerous to the
health and environment. You can actively contribute to sustainable
use of natural resources and the protection of the natural
environment by handing the used device to a recycling centre for used
electrical devices.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt,
ask a more experienced person for help.
• Prior to the assembly, make sure the set contains all
the listed elements and whether none of the parts was
damaged during transport. If any parts are missing or you have
any other reservations, contact the seller.
• Have a look at the drawings and explanations and follow the
assembly manual when assembling the device.
• Be careful during the assembly. There is a risk of injury when
using the tools and parts.
• Remember to keep your surroundings safe. Do not let tools
and parts lie around in chaos. Remember that plastic foil and
bags pose o suffocation risk to small children.
• Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
• Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.
• The manufacturer may have assembled some parts.
ASSEMBLY DIAGRAM (→ See page 2)
ATTENTION!
Do not use parts other than those provided by the
manufacturer.
PARTS LIST
NO. DESCRIPTION QUANTITY
1 Bottom frame 1
2 Main frame 1
3L/R Console columns 1+1
4 Console frame 1
5 Console bracket 1
6 Slope frame 1
7 Main frame reinforcement 1
8 Oil filter channel 1
9 Front roller 1
10 Rear roller 1
11 Spacer 2
12 Cylinder 1
13 Side cap 6
14 Side plate 8
15 Computer panel 1
16 Rear computer panel cover 1
17 Cover 1
18 Computer bezel 1
19 Upper control knob cover 1
20 Lower control knob cover 1
21L/R Handle cover 1+1
22 Upper motor cover 1
23 Motor cover 1
24 Lower engine cover 1
25L/R Frame cover 1+1
26L/R Side rail 1+1
27 Cap 1
28 Roller cover 2
29 Handrail cap 2
30 iPad holder bracket 1
31 Running board 1
32 Running belt 1
33 Safety key 1
34 Oil filter cap 1
35 Engine belt 1
36 Transport wheel 2
37 Flat washer 4
38 Pipe cap 2
39 Ring plug 2
40 Shock absorbing washer 4
41 Power cord clamp 1
42 Transport wheel 2
43 Nylon spacer φ22*10.2*10 4
44 Allen screw M10*38 2
45 Allen screw M10*60 1
46 Allen screw M10*45 1
47 Allen screw M8*40 5
48 Allen screw M8*25 1
49 Allen head screw M8*15 25
50 Allen head screw M10*40 2
51 Allen head screw M8*55 2
52 Allen head screw M8*50 2
53 Allen head screw M8*15 2
54 Allen head screw M6*15 2
55 Countersunk allen head screw M6*30 2
56 Countersunk allen head screw M6*25 4
57 Allen head screw M6*15 4
58 Phillips head screw M3*15 2
59 Allen head screw ST4.0*12 4
60 Allen head screw M5*25 8
61 Phillips head screw M5*16 9
62 Phillips head screws M5*8 5
63 Phillips head screws M4*12 9
64 Phillips head screws M4*8 6
65 Phillips head screw ST4.0*16 28
66 Phillips head screw ST4.0*12 8
67 Phillips head screw ST4.0*8 5
68 Phillips head screw ST2.9*9.5 12
69 Phillips head screw ST2.9*6.5 6
70 Nylon nut M10 6
71 Nyloc nut M8 4
72 Nylock nut M6 8
73 Hex nut M3 2
74 Serrated lock washer Φ10 6
75 Serrated lock washer Φ8 35
76 Flat washer Φ8 2
77 Spring washer Φ8 2
78 Console control plate 1
79 Motor control board 1
80 Power cable 1
81 Motor 1
82 Tilt motor 1
83 Switch 1
84 Automatic switch 1
85 Power socket 1
86 Plastic pad Φ35*Φ10*2.0 2
87 Computer connection cable 1
88 Upper extension cable 1
89 Lower extension cable 1
90 Controller cable 1
91 Control knob 1
92 Control knob upper cable 1
93 Control knob upper cable extension 1
94 Control knob cable lower extension cable 1
95 Control knob lower cable 1
96 Upper pulse sensor cable 1
97 Upper pulse sensor cable extension 1
98 Lower pulse sensor cable extension 1
99 Wireless lower heart rate cable 1